This is the preview version of the Wisconsin State Legislature site.
Please see http://docs.legis.wisconsin.gov for the production version.
(1) This pollutant has no discharge allowance. - See PDF for table PDF
(1) This pollutant has no discharge allowance. - See PDF for table PDF
NR 274.023 History History: Cr. Register, March, 1991, No. 423, eff. 4-1-91.
NR 274.024 NR 274.024 New source performance standards. Any new source subject to this subchapter shall achieve the following standards: - See PDF for table PDF
(1) Within the range of 7.0 to 10.0 at all times. - See PDF for table PDF
(1) Within the range of 7.0 to 10.0 at all times. - See PDF for table PDF
(1) Within the range of 7.0 to 10.0 at all times. - See PDF for table PDF
(1) Within the range of 7.0 to 10.0 at all times. - See PDF for table PDF
(1) Within the range of 7.0 to 10.0 at all times. - See PDF for table PDF
(1) Within the range of 7.0 to 10.0 at all times. - See PDF for table PDF
(1) Within the range of 7.0 to 10.0 at all times. - See PDF for table PDF
(1) Within the range of 7.0 to 10.0 at all times. - See PDF for table PDF
(1) Within the range of 7.0 to 10.0 at all times. - See PDF for table PDF
(1) Within the range of 7.0 to 10.0 at all times. - See PDF for table PDF
(1) This pollutant has no discharge allowance.
(2) Within the range of 7.0 to 10.0 at all times, but if this waste is discharged separately and without commingling with any other wastewater, the pH shall be within the range of 6.0 to 10.0 at all times. - See PDF for table PDF
(1) This pollutant has no discharge allowance
(2) Within the range of 7.0 to 10.0 at all times. - See PDF for table PDF
(1) Within the range of 7.0 to 10.0 at all times.
NR 274.024 History History: Cr. Register, March, 1991, No. 423, eff. 4-1-91.
NR 274.026 NR 274.026 Pretreatment standards for new sources. Except as provided in s. NR 211.13, any new source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the following PSNS: - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF
(1) This pollutant has no discharge allowance. - See PDF for table PDF
(1) This pollutant has no discharge allowance. - See PDF for table PDF
NR 274.026 History History: Cr. Register, March, 1991, No. 423, eff. 4-1-91.
subch. III of ch. NR 274 Subchapter III — Secondary Aluminum Smelting
NR 274.03 NR 274.03 Applicability; description of the secondary aluminum smelting subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from the recovery, processing, and remelting of aluminum scrap to produce metallic aluminum alloys.
NR 274.03 History History: Cr. Register, March, 1991, No. 423, eff. 4-1-91.
NR 274.032 NR 274.032 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.
NR 274.032(1)(1) Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by application of BPT.
NR 274.032(2) (2) Facilities which use water for metal cooling may not discharge process wastewater pollutants to waters of the state.
NR 274.032(3) (3) Facilities which use aluminum fluoride in their magnesium removal process may not discharge process wastewater pollutants to waters of the state.
NR 274.032(4) (4) Facilities which use chlorine in their magnesium removal process shall achieve the following limitations: - See PDF for table PDF
(1) Within the range of 7.5 to 9.0.
NR 274.032(5) (5) Facilities which process residues by wet methods shall achieve the following limitations: - See PDF for table PDF
(1) Within the range of 7.5 to 9.0.
NR 274.032 History History: Cr. Register, March, 1991, No. 423, eff. 4-1-91.
NR 274.033 NR 274.033 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by application of BAT: - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF
(1) At or before the commingling of delacquering scrubber liquor blowdown with other process or nonprocess waters. - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF
NR 274.033 History History: Cr. Register, March, 1991, No. 423, eff. 4-1-91.
NR 274.034 NR 274.034 New source performance standards. Any new source subject to this subchapter shall achieve the following standards: - See PDF for table PDF
(1) Within the range of 7.0 to 10.0 at all times. - See PDF for table PDF
(1) Within the range of 7.0 to 10.0 at all times. - See PDF for table PDF
(1) Within the range of 7.0 to 10.0 at all times. - See PDF for table PDF
(1) Within the range of 7.0 to 10.0 at all times. - See PDF for table PDF
(1) At or before the commingling of delacquering scrubber liquor blowdown with other process or nonprocess waters.
(2) Within the range of 7.0 to 10.0 at all times. - See PDF for table PDF
(1) Within the range of 7.0 to 10.0 at all times. - See PDF for table PDF
(1) Within the range of 7.0 to 10.0 at all times. - See PDF for table PDF
(1) Within the range of 7.0 to 10.0 at all times. - See PDF for table PDF
(1) Within the range of 7.0 to 10.0 at all times. - See PDF for table PDF
(1) Within the range of 7.0 to 10.0 at all times.
NR 274.034 History History: Cr. Register, March, 1991, No. 423, eff. 4-1-91.
NR 274.035 NR 274.035 Pretreatment standards for existing sources. Except as provided in ss. NR 211.13 and 211.14, any new [existing] source subject to the secondary aluminum smelting subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the following PSES: - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF
(1) At or before the commingling of delacquering scrubber liquor blowdown with other process or nonprocess waters. - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF
NR 274.035 History History: Cr. Register, March, 1991, No. 423, eff. 4-1-91.
NR 274.036 NR 274.036 Pretreatment standards for new sources. Except as provided in s. NR 211.13, any new source subject to the secondary aluminum smelting subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and achieve the following PSNS: - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF
(1) At or before the commingling of delacquering scrubber liquor blowdown with other process or nonprocess waters. - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF
NR 274.036 History History: Cr. Register, March, 1991, No. 423, eff. 4-1-91.
subch. IV of ch. NR 274 Subchapter IV — Primary Copper Smelting
NR 274.04 NR 274.04 Applicability; description of the primary copper smelting subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from the primary smelting of copper from ore or ore concentrates by processes such as roasting, converting, leaching if preceded by a pyrometallurgical step, slag granulation and dumping, and fire refining and from the casting of products from these operations.
NR 274.04 History History: Cr. Register, March, 1991, No. 423, eff. 4-1-91.
NR 274.041 NR 274.041 Specialized definitions. The following definitions apply to the terms used in this subchapter:
NR 274.041(1) (1) “Within the impoundment,” for purposes of calculating the volume of process wastewater which may be discharged, has the following meanings:
NR 274.041(1)(a) (a) If the impoundment was constructed prior to February 27, 1975, “within the impoundment” means the surface area within the impoundment at the maximum capacity plus the surface area of the inside and outside slopes of the impoundment dam and the surface area between the outside edge of the impoundment dam and any seepage ditch adjacent to the dam upon which rain falls and is returned to the impoundment, but the surface area allowance for external appurtenances to the impoundment may not be more than 30% of the water surface area within the impoundment dam at maximum capacity.
NR 274.041(1)(b) (b) If the impoundment was constructed on or after February 27, 1975, “within the impoundment” means the water surface area within the impoundment at maximum capacity.
NR 274.041 History History: Cr. Register, March, 1991, No. 423, eff. 4-1-91.
NR 274.0415 NR 274.0415 Combining waste streams. If the waste streams subject to this subchapter are combined for treatment or discharge with waste streams subject to the primary electrolytic copper refining subchapter or the metallurgical acid plant subchapter, the quantity of each pollutant or pollutant property discharged may not exceed the quantity of each pollutant or pollutant property which could be discharged if each waste stream was discharged separately.
NR 274.0415 History History: Cr. Register, March, 1991, No. 423, eff. 4-1-91.
NR 274.042 NR 274.042 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.
NR 274.042(1)(1) Except as provided in 40 CFR 125.30 to 125.32 and sub. (2), any existing point source subject to this primary copper smelting subchapter may not discharge process wastewater pollutants to waters of the state.
NR 274.042(2) (2) A process wastewater impoundment which is designed, constructed, and operated to contain the precipitation from the 10-year, 24-hour rainfall event as established for the impoundment's location by the national climatic center, national oceanic and atmospheric administration, may discharge a volume of process wastewater equivalent to the volume of precipitation which falls within the impoundment in excess of the precipitation attributable to the 10-year, 24-hour rainfall event, when such an event occurs.
NR 274.042 History History: Cr. Register, March, 1991, No. 423, eff. 4-1-91.
NR 274.043 NR 274.043 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable.
NR 274.043(1)(1) Except as provided in 40 CFR 125.30 to 125.32 and sub. (2), any existing point source subject to this subchapter may not discharge process wastewater pollutants into waters of the state.
NR 274.043(2) (2) A process wastewater impoundment which is designed, constructed, and operated to contain the precipitation from the 25-year, 24-hour rainfall event as established for the impoundment's location by the national climatic center, national oceanic and atmospheric administration, may discharge a volume of process wastewater equivalent to the volume of precipitation which falls within the impoundment in excess of the precipitation attributable to the 25-year, 24-hour rainfall event, when such an event occurs.
NR 274.043 History History: Cr. Register, March, 1991, No. 423, eff. 4-1-91.
NR 274.044 NR 274.044 New source performance standards. Any new source subject to this subchapter may not discharge process wastewater pollutants into waters of the state.
NR 274.044 History History: Cr. Register, March, 1991, No. 423, eff. 4-1-91.
NR 274.046 NR 274.046 Pretreatment standards for new sources. Except as provided in s. NR 211.13, any new source subject to this subchapter which introduces pollutants into a POTW shall comply with ch. NR 211 and may not discharge process wastewater pollutants to a POTW.
NR 274.046 History History: Cr. Register, March, 1991, No. 423, eff. 4-1-91.
subch. V of ch. NR 274 Subchapter V — Primary Electrolytic Copper Refining
NR 274.05 NR 274.05 Applicability; description of the primary electrolytic copper refining subcategory. This subchapter applies to the discharge of pollutants to waters of the state and the introduction of pollutants into POTWs from the electrolytic refining of primary copper, such as anode casting performed at refineries which are not located on-site with a smelter, product casting, and byproduct recovery.
NR 274.05 History History: Cr. Register, March, 1991, No. 423, eff. 4-1-91.
NR 274.052 NR 274.052 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by application of BPT: - See PDF for table PDF
(1) Within the range of 6.0 to 9.0.
NR 274.052 History History: Cr. Register, March, 1991, No. 423, eff. 4-1-91.
NR 274.053 NR 274.053 Effluent limitations representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. Except as provided in 40 CFR 125.30 to 125.32, any existing point source subject to this subchapter shall achieve the following effluent limitations representing the degree of effluent reduction attainable by application of BAT: - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF - See PDF for table PDF
NR 274.053 History History: Cr. Register, March, 1991, No. 423, eff. 4-1-91.
NR 274.054 NR 274.054New source performance standards. Any new source subject to this subchapter shall achieve the following standards: - See PDF for table PDF
Loading...
Loading...
Published under s. 35.93, Stats. Updated on the first day of each month. Entire code is always current. The Register date on each page is the date the chapter was last published.